When performing an oil service reset, you may see multiple reset options available under:
Service Interval Reset → View Full Reset List → Reset Engine Oil
Available reset options:
- Mileage Based Reset
- Percentage Based Reset Type 1
- Percentage Based Reset Type 2
The correct option depends on the BMW model and the type of Condition Based Service (CBS) system installed. This article explains the purpose of each reset type and when it should be used.
BMW Condition Based Service (CBS)
BMW’s Condition Based Service (CBS) system tracks maintenance needs based on vehicle use and operating conditions. Depending on the model year and platform, the oil service indicator may use mileage-based calculations or an oil-life algorithm.
The following reset options should be available in our scan tool under
Option 1: Mileage-Based Reset
The Mileage-Based Reset is the traditional service reset method used on many earlier BMW CBS systems.
How It Works
- Resets the oil service interval to a fixed mileage value programmed by BMW.
- The remaining service interval decreases based primarily on:
- Miles driven
- Time elapsed since the reset
- Commonly found on many E-Series BMW models.
Example
After performing a reset:
- Oil service displays 10,000 miles remaining
- After driving 1,000 miles, approximately 9,000 miles remain
This method functions like a standard maintenance counter and does not heavily factor in driving conditions.
Option 2: Percentage-Based Reset Type 1
Percentage-Based Reset Type 1 resets the oil monitoring system to 100% oil life.
How It Works
Unlike a fixed mileage counter, CBS calculates oil life dynamically based on vehicle operation, including:
- Engine load
- Fuel consumption
- Number of cold starts
- Engine operating temperature
- Driving habits and conditions
Example
After performing a reset:
- Oil life displays 100%
- After moderate driving conditions:
- Approximately 90% oil life may remain after 1,500 miles
- Approximately 75% oil life may remain after 3,500 miles
Note: The percentage and mileage remaining may not decrease at the same rate because the system continuously evaluates actual engine operating conditions.
Option 3: Percentage-Based Reset Type 2
Percentage-Based Reset Type 2 is commonly the most misunderstood option.
This reset is typically used on later BMW platforms that feature more advanced CBS and engine management strategies.
How It Works
In addition to resetting oil life to 100%, Type 2 may:
- Reinitialize oil-life calculations
- Reset additional CBS-related adaptation values
- Synchronize calculations used by the DME (Digital Motor Electronics)
- Enable advanced oil condition monitoring on supported vehicles
Common Applications
Percentage-Based Reset Type 2 is typically found on certain:
- F-Series BMW models
- G-Series BMW models
These vehicles use more sophisticated maintenance algorithms, causing oil-life calculations to adjust more rapidly after the reset based on actual operating conditions.
Which Reset Should I Use?
The appropriate reset method depends on the BMW model and CBS version installed on the vehicle.
General guidelines:
| Reset Type | Typical Use |
|---|---|
| Mileage-Based Reset | Older BMW CBS systems |
| Percentage-Based Reset Type 1 | CBS systems using dynamic oil-life calculations |
| Percentage-Based Reset Type 2 | Later F-Series and G-Series vehicles with enhanced CBS/DME integration |
If one reset method does not complete successfully, try the alternate reset type available for the vehicle.
If the Reset Fails
If the Oil Maintenance Light does not reset using any of the available CBS reset options:
- Exit the Service Interval System.
- Navigate to:
- Systems List
- Instrument Panel
- Functional Tests
- Actuator Tests
- Reset Control Unit
- Perform the Reset Control Unit function and then attempt the Reset via the Service Interval System again.