If you experience one or more of the following symptoms you may need to install a software license update.
Note: This only applies for platforms using software versions
21.4 or older. If you previously installed this patch and the symptom persists, please follow the steps again.
Symptoms (What to look for)
-
A message displays upon start-up or when launching the Scanner function. The message starts with or is similar to :
- This software is not registered….
- Your software license has expired….
- Your software subscription will expire in “x” days…
- The software subscription has expired….
- ETHOS only - Cannot select a vehicle make or launch the Scanner function
What To Do
- Verify the scanner's date and time settings are correct. Select Tools from the scanner home screen, then System Information.
- Date is NOT correct: Your scanner will not accept this license patch. However your tool will continue to function after displaying the message for 30-90 seconds.
- Date is correct: Proceed to step 2.
- Download and install ShopStream Connect on a Windows PC.
-
Connect your scanner to the PC with a USB cable.
Note: Scanner must be in 'Connect to PC' mode. - Check for updates by selecting 'Tools', 'Update Software', then your scanner from the list.
- Select Finish.
- Disconnect your scanner, and restart the device.
Alternatively you can watch the Diagnostic Quick Fix (see Video - How to Download and Install ShopStream-Connect® Software / Update License below)
Video - How to Download and Install ShopStream-Connect® Software / Update License
Still Need Help?
If you are still experiencing problems after installing the update, please contact Customer Support.